Thingiverse
Bonnet shock absorber (Stencil)
door Antonio_EsGa
12
Downloads
22
Likes
0
Makes
This design is a stencil to make a support strut to install a shock absorber for the bonnet (Peugeot 206).
You can print the model to see how it fits in the hood bolts of your car and then use it to trace the shape on the metal.
At first I used a 30x1.5mm square tube to make the part, but when I installed it and tested it, it was bent by the force of the shock absorber, so I ended up using a 3mm plate.
Support model v2.0 has a longer reinforcement to prevent it from bending.
You can print the model to see how it fits in the hood bolts of your car and then use it to trace the shape on the metal.
At first I used a 30x1.5mm square tube to make the part, but when I installed it and tested it, it was bent by the force of the shock absorber, so I ended up using a 3mm plate.
Support model v2.0 has a longer reinforcement to prevent it from bending.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!