Bookmaker - Landscapes set

Landscapes - BookmarkPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 157.97x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 1.5mm and the Actual Depth is 1.5mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #13 (1.12mm) swap to Silver At layer #16 (1.36mm) swap to White for the rest. After printing use a lighter/ torch, by quickly passing the printed parts you will get rid of the tiny stringing on these type of prints. Thanks!