Bookmark - Kawaii Kitty

by 29FLO · Hueforge & Lithophane

88 Downloads

126 Likes

44 Makes

The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Ice Blue At layer #3 (0.32mm) swap to Black At layer #5 (0.48mm) swap to Ice Blue At layer #12 (1.04mm) swap to Sakura Pink At layer #17 (1.44mm) swap to Black At layer #19 (1.6mm) swap to White for the rest↓ Ps. If you like my work you can always hit ↓Boost Me:)