Bookmark - Sweet Hamster

by 29FLO · Hueforge & Lithophane

38 Downloads

43 Likes

22 Makes

Here is: Bookmark with a Sweet Hamster.The best results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle should work too.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 52.67x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Mandarin Orange At layer #18 (1.52mm) swap to Sakura Pink At layer #20 (1.68mm) swap to White for the rest. ↓ Ps. If you like my work you can always hit ↓Boost Me:)