Cults3D
€ Paid
Game
Go to Model
Borderlands 2 Hellfire
0
Downloads
0
Likes
0
Makes
Here is a digital download if a Hellfire from Borderlands 2.
The Hellfire was printed on Ender 3 machine in PLA+.
Terms of use also included in download:
These files are not for resale and only to be used by the person purchasing the item.
These are not to be posted on other sites. For use only by the person purchasing.
Tips on assembly:
Sanding:
For any rough spots due to support material or in general a Dremel is a great tool to smooth out those areas. If you don’t have a Dremel some sandpaper will do just fine and can be useful in smoothing layer lines. I usually start at 220 grit and will go down to 500, then 1200 depending on the model.
A technique I often use to smooth layer lines is to add some drywall putty. Once the model is glued together with super glue just wipe on the putty in the needed areas and let dry, then sand. You can also use wood putty, bonds XCT epoxy… There are many ways to fill in the lines. For the big ones I will use the drywall putty or B
The Hellfire was printed on Ender 3 machine in PLA+.
Terms of use also included in download:
These files are not for resale and only to be used by the person purchasing the item.
These are not to be posted on other sites. For use only by the person purchasing.
Tips on assembly:
Sanding:
For any rough spots due to support material or in general a Dremel is a great tool to smooth out those areas. If you don’t have a Dremel some sandpaper will do just fine and can be useful in smoothing layer lines. I usually start at 220 grit and will go down to 500, then 1200 depending on the model.
A technique I often use to smooth layer lines is to add some drywall putty. Once the model is glued together with super glue just wipe on the putty in the needed areas and let dry, then sand. You can also use wood putty, bonds XCT epoxy… There are many ways to fill in the lines. For the big ones I will use the drywall putty or B
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
