Borg Cube Facias for mITX Chassis

Mini-ITX Borg Cube This is an additional item that can be used with my 3D Printed miniITX case (https://makerworld.com/en/models/1800204-mini-itx-cube-pc-case-chassis#profileId-1919643). This is a simple model consisting of four flat panels for the sides. The panels overlap slightly to make the edges neater, the braces are then glued into place to hold it together using the braces from the chassis print profile; a little skill is required to get it all square. Each panel is labelled on the print so you can see which is which, the openings in the panels should correspond to the position of the hardware in the case. There are four holes at the bottom of the assembled structure which can have some magnets fitted and glued in place, this will allow it to be held onto the chassis. There is also an additional M3 cap head screw that does in the top to secure everything. This is printed in three different colours for aesthetics, but you could print it all one colour by changing the filament as