Borlee Mini01/TL4076 E3D V6 Clone Mount

This mount is designed to hold an E3D V6 Clone hot end I got from E-Bay. It's designed to bolt onto the existing X-axis mount first, then have the Clone E3D mounted to it.

While it does hold it well, it does cause the printer to print slightly to the left on the bed, so needs the Z-Axis to be shifted to the right to compensate.

The M3 Nut holes go deep to allow one to use the easier to find M3 25mm bolt. If you have trouble getting the nuts in the right alignment, see if you can get a LONG M3 bolt to screw it on the end of and pull it through.

I use the 2-in-1 cooling fan/part cooling blower by eipionezero

https://www.thingiverse.com/thing:839620

My clone needed me to drill 2 small holes and use small cable ties to hold it on, as it fell off after a few prints. >_< Definately worth it though as the small amount of cooling really makes PLA print better on these printers.