Bottle Washer V1.0

Need to wash a lot of Bottles? When brewing beer at home, you need to wash the bottles fast and get them dry. Use this bottlewasher model, easy to print, easy to assamble. All you need in addition is a pump, 24 screws with nuts and some glue. Additionally you need to print the bottlerack at least once or some more if you want to let more bottles dry.https://makerworld.com/en/models/851159 Use a watertight box, fill until the pump is fully submerged and use a dedicated bottle cleaning liquid for used beerbottles. You need Water at around 60-70 degrees centigrade so you need to print it with a good quality PETG. I had no problem with the esun PETG. It works also without the 4 feet, but it‘s alot easier to handle with them i think.I tried with 2 different pumps and I suggest this one for full power:https://www.amazon.de/dp/B0CNRD3F7Q And 24 M4 countersunk screws with nuts. Assembly Guide:Put the two halfs together, the only way they fit.Fill the nut-Holes with nuts and press it fully in.P