Bow Staff vs Dragon

by Hazardousafe · Hueforge & Lithophane

0 Downloads

0 Likes

0 Makes

Project: Bowstaff vs Dragon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 178.44x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.

Hazardousafe also publishes on

11 additional models across 1 more platforms

MakerOnline

11 models

♥ 921 ↓ 3,791

Frequently Asked Questions

Which 3D printer is suitable for Bow Staff vs Dragon?

Any FDM printer should handle Bow Staff vs Dragon just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 240 mm is recommended.

Does Bow Staff vs Dragon need supports when printing?

Yes, Bow Staff vs Dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Bow Staff vs Dragon available in?

Bow Staff vs Dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Bow Staff vs Dragon free to download?

Yes, Bow Staff vs Dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Bow Staff vs Dragon

Similar Models

Add to Collection