Braces for Elf or Coreception

I wanted to add angel braces to my elf since they provide the most stiffness. If you are just looking for corner braces without the angels you could use just the flat models below.

You need 70 m4 t-nuts and m4x10mm bolts. You will also need 4 m4x15mm bolts and nuts to attached the strait rod adapters. I just ordered bulk bags of amazon. For the rods I used 3/8 thread all. I used two six foot pieces that were 6 dollars each at Menards. You will also need 12 3/8 nuts. Cuttings two 27" pieces off each for the angels left me with 18" for the strait support on the front and back. Assembly is pretty self explanatory.