Thingiverse

Bracket for Battery Connector

by dsmith1960

13 Downloads

8 Likes

0 Makes

This Bracket is for mounting the Battery Disconnect Holder (https://www.thingiverse.com/thing:5180683) to the front chassis mount on my Jeep JK Wrangler. I used a #10-24 x 1/2" long Flat Head Screw, and blue thread locker, to fasten the bracket to the stock mounting bracket on the chassis near the front bumper. The Battery Disconnect Holder is mounted to this bracket using four #8-32 x 5/8" long Button Head Socket Cap Screws and four #8-32 NyLok nuts. (Other suitable machine screw hardware will work too.)

The wiring is 8 AWG from a set of Jumper Cables.

I filed two notches in the Battery Disconnect Holder to accommodate the lanyard of the cover for the battery terminals.

air compressor angle bracket battery bracket bumper chassis mount connector disconnect Jeep JK jeep wrangler mounting bracket wench wiring air compressor angle bracket battery bracket bumper chassis mount connector disconnect Jeep JK jeep wrangler mounting bracket wench wiring

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format