bramstrokers dracula

bramstrokers dracula replace blk when done with other color remember to use the same blk setting on objects with new color Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x282.89mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Generic Black Transmission Distance: 0.2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA Overture Pink Transmission Distance: 3.2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Orange At layer #16 (1.36mm) swap to Pink At layer #19 (1.6mm) swap to Jade White for the rest.