BreachHueforge | Twenty One Pilots

Breach Album Hueforge | Twenty One PilotsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x198.2mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.9mmFilaments Used:PLA eSUN Black Transmission Distance: 0.8PLA eSUN Fire Engine Red Transmission Distance: 5.4PLA BambuLab Basic Red Transmission Distance: 4PLA eSUN Red Transmission Distance: 4.8PLA eSUN Beige Transmission Distance: 3.5PLA eSUN Cold White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Fire Engine RedAt layer #13 (1.12mm) swap to Red (Bambu)At layer #18 (1.52mm) swap to Red (eSUN)At layer #24 (2mm) swap to BeigeAt layer #29 (2.4mm) swap to Cold White for the rest. … or use the .3mf file ;)If you're using an AMS with 4 slots replace the following filaments with the new colors as you go:swap Black with Beigeswap Fire Engine Red with