Thingiverse

Bridging Test

von AnsonB

55 Downloads

37 Likes

0 Makes

## Summary

The two major factors that come into play when printing a good bridge are **Temperature** and **Print Speed**. The lower both of these respective values are the better your bridges are likely to succeed. The goal of this project is that its a test that prints very fast, the full test should print in under 45 minutes.

This model is fully parameterized if you have Inventor.

## Contents

This project contains two .stl files that are ready to be sliced and printed. bridgeTest.stl is a complete test with 4 different lengths. oneBridge.stl contains only the longest of the bridges at 25mm. The other files is bridgeTest.ipt this is a parameterized inventor file for changing the parameters of the test for anyone who wishes to do that, but I think the default setup is good.

## Goals of This Print

This print is designed to be fast to help you troubleshoot any issues your printer may encounter as your bridges increase in length. By default, the bridge spans are 10mm, 15

3dtest Bench-mark Bench-marking Benchie benchmark Benchmarking Benchy bridge bridge test bridging bridging test calibrate calibration Calibration part calibration test easy easy print easy to print Fast fast print 3dtest Bench-mark Bench-marking Benchie benchmark Benchmarking Benchy bridge bridge test bridging bridging test calibrate calibration Calibration part calibration test easy easy print easy to print Fast fast print

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

keine Supports

Ohne Supports Einteilig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker