BROFIST- BambuRefillableOwnFilterInsertSaveTime v1

Give your Bambu printer a BROFIST - A direct replacement for the stock Bambu carbon filter in the X1C/P1S. It can also function as an added filter at the bottom to the sides (out of the way of the bed). A bit of tape between the lid & box, then doubled over on the outside will serve as a pull tab. Or you can use tweezers. The world is your oyster! Save money by buying your carbon filtration material in bulk.-----------------------------To install in a vertical orientation at the bottom of the chamber (not required, but a nice option, you will need:4x M3 Short heat inserts from CNC Kitchen4 x M3x4mm TX10 bolts from CNC Kitchen (4 x M3x4mm Hex machine bolts should work, provided the heads are not deeper than 4mm total)Heat insert tip to suit.-----------------------------Sliced and printed as pictured in the 0.20 Strength preset using eSun Black ASA with some minor changes:Seam position - Back4 Walls4 Top & Bottom ShellsTop, Bottom and Solid Infill pattern - Rectilinear.35% Adaptive Cubic