Bruce Lee Doble Dragon

Project: Bruce Lee Doble Dragon .hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.13x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA smartfil oro silk Transmission Distance: 1.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 5 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to oro silk At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White for the rest. Proyecto: bruce lee.hfpImprima con un relleno del 100 % con una altura de capa de 0,08 mm y una capa base de 0,16 mmEl modelo mide 113,13 x 200 mmPuede imprimir con alturas de capa superiores por debajo de la profundidad mín