Bruce Lee hueforge

Project: bruce lee.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 132.97x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smatfil White Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with negro At layer #12 (1.04mm) swap to White At layer #15 (1.28mm) swap to negro At layer #17 (1.44mm) swap to Orange At layer #22 (1.84mm) swap to Yellow At layer #25 (2.08mm) swap to White for the rest.