Bruder LowLoader Conversion Parts

Ok Here is majority of parts i used in converting a Bruder lowloader to look a bit more scale. Metal ramps and the extension strengthening metal work all came from HTTP://www.piggytaylor.com/. Everything is designed to fit the length of the trailer after fitting these, trailer head is about 300mm and the deck is about 600mm. The trailer legs are an original design by maxzol78 HTTP://www.thingiverse.com/thing:4058058, and they are great other than that a lot of different thickness plasticard was used.

Electronics Box

This was printed in white PLA 30% infill 0.2 layer height does not require any supports, I used hinges from model aircraft store as these where about the right size. The battery holder will fit a Turnigy Nano Tech 3s 2.5amp battery and will fit over the support bars on the bottom of the box.

Trailer Under runners an boxes

The runners boards are again in white PLA 50% infill to try reduce see through effect, 0.2 layer height and no supports or rafts. The boxes