Thingiverse
Bruiser230 6" Quadcopter Frame (CNC Version)
door jonbuckles
12
Downloads
8
Likes
1
Makes
Overview
----------------
Here is the Bruiser230, 230mm/6" Quadcopter frame (CNC Version)
This design was made with replaceable arms and braces to make it easier to swap out the arms instead of the whole frame. Swapping the arms can be done without removing the canopy so as not to interfere with the electronics; just loosen the arm screws and replace the arm.
Supports 30x30 or 20x20 mounting patterns.
Supports 16x16 or 19x19 motor mounting patterns.
Flight Test
---------------
https://youtu.be/oNwiqLtUpw8
HD Flight
--------------
https://youtu.be/Rkx6JNvFqb4
*The canopies included are not my design, I take no credit for them*
----------------
Here is the Bruiser230, 230mm/6" Quadcopter frame (CNC Version)
This design was made with replaceable arms and braces to make it easier to swap out the arms instead of the whole frame. Swapping the arms can be done without removing the canopy so as not to interfere with the electronics; just loosen the arm screws and replace the arm.
Supports 30x30 or 20x20 mounting patterns.
Supports 16x16 or 19x19 motor mounting patterns.
Flight Test
---------------
https://youtu.be/oNwiqLtUpw8
HD Flight
--------------
https://youtu.be/Rkx6JNvFqb4
*The canopies included are not my design, I take no credit for them*
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!