Thingiverse
Brushless Shutter Bug
von Noctaro
49
Downloads
30
Likes
0
Makes
Update:
Added a new baseframe option. It will fit most Crazybee form factor boards with motorconnectors.
My FPV Whoop Quadctoper design. It has a rigid base, with 83mm motor distance.You may choose between the normal ducts or ducts with an additonal saftey ring to get more rigidity. In hard crashes the ducts will break, but no worries, you can exchange them with only 4 screws in no time.The base will hold up well. Until now i did not break this version. The AUW when using 300mah Lipos is around 70grams. It can take up to 650mah Lipos. A lipo cage for 300mah battery is already included and options for 450mah and 650mah will be added here soon. Just pop it in at the center hole of your baseframe. Print the lipocage with tpu.
I use the F7 All in one Cam but it will fit various FPV Cams, you may use stylesuxxs customizable cam mount. Base settings for each cam within this thingi will fit this frame. Best to print the cam mount in TPU. I also mounted small standoffs to the base of th
Added a new baseframe option. It will fit most Crazybee form factor boards with motorconnectors.
My FPV Whoop Quadctoper design. It has a rigid base, with 83mm motor distance.You may choose between the normal ducts or ducts with an additonal saftey ring to get more rigidity. In hard crashes the ducts will break, but no worries, you can exchange them with only 4 screws in no time.The base will hold up well. Until now i did not break this version. The AUW when using 300mah Lipos is around 70grams. It can take up to 650mah Lipos. A lipo cage for 300mah battery is already included and options for 450mah and 650mah will be added here soon. Just pop it in at the center hole of your baseframe. Print the lipocage with tpu.
I use the F7 All in one Cam but it will fit various FPV Cams, you may use stylesuxxs customizable cam mount. Base settings for each cam within this thingi will fit this frame. Best to print the cam mount in TPU. I also mounted small standoffs to the base of th
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
