Brutalist Lamp

This lamp kit should slot together tightly, with no glue needed for assembly! All laser cut parts are sized to be 3mm thick. There are a total of 19 laser cut parts, and 1 3D printed PLA diffuser. The information for the diffuser can be found here: https://makerworld.com/en/models/1425067-brutalist-lamp-diffuser#profileId-1481106 The lamp in the photograph was made using a laser grade black MDF, available here: https://hobarts.com/products/3mm-laser-grade-black-mdf?variant=42840799772909. As Bambu Suite currently doesn't have a pre-set for this material, I've set the material in the profile to 3mm thick birch plywood. In addition to the laser cut and printed parts, you will need a bulb kit. The lamp is designed to use an E14 bulb fitting, which should fix through the 28mm hole in the central ring. This is the bulb kit I used: https://amzn.eu/d/g0P2k3F Inspired by the post-war Brutalist architecture, the angular shapes of the lamp cast long regular shadows, whilst providing a so