Thingiverse
BT-80 Ejection Baffle Templates
por JackHydrazine
11
Descargas
8
Likes
0
Makes
These STLs are to be used as templates for making your own ejection baffle plates using balsa or plywood in conjunction with a tubing coupler. They are design to fit Estes BT-80 tubing.
One side of the plates contains a 7.00mm hole in the center to allow the use of a 1/4" (6.35mm) bolt eye for securing the parachute and shock cord.
There are five STLs with two choices for one end of the baffle and two choices for the other end. The other is a coupler tube that is about two inches (50.8mm) in length.
The pics included on this page give you an idea of how they are used.
One side of the plates contains a 7.00mm hole in the center to allow the use of a 1/4" (6.35mm) bolt eye for securing the parachute and shock cord.
There are five STLs with two choices for one end of the baffle and two choices for the other end. The other is a coupler tube that is about two inches (50.8mm) in length.
The pics included on this page give you an idea of how they are used.
JackHydrazine también publica en
2 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
