BTR 70

by Trei D · Other Miniatures

193 Downloads

74 Likes

83 Makes

28.07.2024 UPDATEI have made modifications of the design, as follows:Body:1. geometry updated to use less supports2. added custom supports to use less material3. the wheels pins modified to snap in easilyTurret: no changesTurret pin: updated it to the correct sizeWheels: geometry updated(small imperfection spotted) Original TextI have remixed the body of the BTR, by adding a pin for the turret to stay in place and to be able to rotate.In addition, I have redesigned the wheels to be snapped-in and also to rotate. Printing instruction:Use supports for the Body, turret and wheels.I printed all the models using a 0.16 layer height.Print time: 3h 30 min on P1S.

btr70

Trei D also publishes on

17 additional models across 1 more platforms

Printables

17 models

♥ 333 ↓ 1,487 ⚒ 12

Frequently Asked Questions

Does BTR 70 need supports when printing?

Yes, BTR 70 will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print BTR 70?

According to the design notes, BTR 70 takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is BTR 70 available in?

BTR 70 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is BTR 70 free to download?

Yes, BTR 70 is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

BTR 70

Similar Models

Add to Collection