BTT Octopus V1.1 Casing

I designed this casing for my new Octopus V1.1 board and thought id share it with you guys, its a basic enclosure with dual 4010 driver cooling fans, i originally designed it to be 50mm high but i wanted to include fan ducts instead of just open fans inside the lid so i increased the height to 60mm and i have included both housing stl's so you have the choice to use the 60mm with fan ducts or the 50mm without the fan ducts though you can still use the fan ducts on the 50mm but the fan will need to be mounted on the outside of the lid.

My enclosure is exposed on my printer so i added the bigtreetech Octopus Logo in red on black and i think it pops out nicely but i have included a lid without the Octopus Logo....

There are:
4x 20mm holes to the rear of the housing to facilitate wiring inputs and outputs.
2x rectangular holes in the front face, the larger is 25x10mm for exp1 and exp2 or exp3 LCD wires and connectors, the smaller is 16x5mm for tft rs232 wires.
3x 4mm mounting hole