Thingiverse
BTT TFT 5 - Screen Bezel
door alpokemon
18
Downloads
18
Likes
1
Makes
This is a simple bezel to mount the BTT TFT 5 screen. It also comes with 2 brackets that bolt to 2020 and rests at an angle.
The back has a large hole to allow the display and RS232 cable to pass into the case as well as enough room for the cables to mount and flex without pinching.
Holes in each corner that mounts through the top of the case, through the TFT5 and then into the back. Uses 4 M3x10mm. For the bracket, you will need M3 Tnuts.
F360 Archive and STEP for modding.
The back has a large hole to allow the display and RS232 cable to pass into the case as well as enough room for the cables to mount and flex without pinching.
Holes in each corner that mounts through the top of the case, through the TFT5 and then into the back. Uses 4 M3x10mm. For the bracket, you will need M3 Tnuts.
F360 Archive and STEP for modding.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
