MakerWorld
Hueforge & Lithophane
Ver Modelo
Buck
13
Descargas
24
Likes
5
Makes
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments. Substitute as needed. Swap Instructions: Start with Beige At layer #9 (0.8mm) swap to Brown At layer #12 (1.04mm) swap to Dark Brown At layer #15 (1.28mm) swap to Black At layer #20 (1.68mm) swap to Blue Gray At layer #23 (1.92mm) swap to Jade White for the rest.
Corp también publica en
338 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
