BUFFALO BILLS

Project: BUFFALO-BILLS.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x149.92mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Default White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4This print uses 3 unique filamentsSwap Instructions: Start with White At layer #9 (0.8mm)