BUILDING UNDER CONSTRUCTION 1:87 HO SCALE

This design is a very heavy-duty steel beam BUILDING UNDER CONSTRUCTION. The main roof support structure has built in BRIM BUTTONS to prevent lift up, so it is not necessary to include a BRIM. They are easily removed. Use the concrete base as a template to hold the roof support legs, DO NOT GLUE the legs to the base, after assembly remove the upper structure for easy painting. Bricks under construction and corrugated roofing is also included if you decide to use it. It is a simple assembly yielding a very interesting industrial look to your layout.

I exclusively print with PLA and have found that ordinary clear Klean-Strip lacquer thinner is a wonderful glue. Make a small test for yourself of two flat pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished. For heavier constru