Bulbasaur Hueforge 7x5

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x124.95mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 1.6mmPLA BambuLab Basic Brown Transmission Distance: 2PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Matte Grass Green Transmission Distance: 2PLA BambuLab Basic BambuLab Green Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BrownAt layer #6 (0.56mm) swap to BlackAt layer #8 (0.72mm) swap to Grass GreenAt layer #10 (0.88mm) swap to BambuLab GreenAt layer #14 (1.2mm) swap to Jade White for the rest. You may scale the width and length but do not change the height, the print will fail.