Bulbasaur - Pokemon - HueForge

Happy Pokemon Day 2026! I got inspired with the rerelease of Leaf Green. For this print, I did use a 0.2mm Stainless Steel nozzle. The model is 68.42mm by 100mm in size or slightly bigger then a trading card. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm This print uses 6 unique filaments Swap Instructions: Start with Jade White - PLA BambuLab Basic Jade White Transmission Distance: 5 (Any white will probably be fine.) At layer #17 (0.8mm) swap to Mistletoe Green - PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 At layer #23 (1.04mm) swap to Arctic Teal - PLA PolyTerra Arctic Teal Transmission Distance: 0.1 At layer #29 (1.28mm) swap to Blue - PLA Overture Blue Transmission Distance: 1.5 At layer #31 (1.36mm) swap to Charcoal Black - PLA PolyTerra Charcoal Black Transmission Distance: 0.3 (Any black will probably be fine.) At layer #38 (1.64mm) swap to Scarlet Red for the rest - PLA BambuLab Matte Scarlet Red Transmission Distance: 2 When lo