Burne Out Hueforge

Project: Burne Out.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 195.28x235mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Jade White At layer #20 (1.68mm) swap to Yellow Border Only Colors from here until the end. At layer #21 (1.76mm) swap to Jade White for the rest.