Thingiverse
BussInsertAdapter
by 2phburns
7
Downloads
4
Likes
0
Makes
Designed replacement for a Glass Cartridge Fuse aka Buss Fuse 1/4" dia x 1-1/4" long.
Plastic thing is used to hold the contacts and 1/4" dia bar of brass.
Plastic thing provides the correct spacing between the contacts.
Bar is soldered to the contacts which are then inserted into plastic.
Contacts can be found here:
http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-ND/2092485
I will update this page when I've made a couple and let you know if it works.
Plastic thing is used to hold the contacts and 1/4" dia bar of brass.
Plastic thing provides the correct spacing between the contacts.
Bar is soldered to the contacts which are then inserted into plastic.
Contacts can be found here:
http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-ND/2092485
I will update this page when I've made a couple and let you know if it works.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!