Thingiverse
Bust painting cap 2.0
von MarekDeOor
0
Downloads
0
Likes
0
Makes
A simpler vice cap (for painting scale model busts) that will fit on most bottle cap painting handles.
Simply attach some double sided tape on the inner parts of the cap and then clamp the bust pin between the two parts of the cap. Apply some generic tape around the cap to make sure the two parts do not fall apart.
The standard diameter of the hole is 6mm, but this can of course be decreased or increased by adjusting the file before printing.
I would kindly ask you to credit me if you share this file or the printed model on the socials/ internet.
Simply attach some double sided tape on the inner parts of the cap and then clamp the bust pin between the two parts of the cap. Apply some generic tape around the cap to make sure the two parts do not fall apart.
The standard diameter of the hole is 6mm, but this can of course be decreased or increased by adjusting the file before printing.
I would kindly ask you to credit me if you share this file or the printed model on the socials/ internet.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!