c270 Prusa Mk3 Camera mount

Updated 3-22-2019
Made a beefier version of the mount. Print out the "Beefy" versions. Your printer will need to be able to print with tight tolerances for the thread to work.

Beefy C270 Bracket.stl
Beefy bed mount.stl
Beefy Collar.stl
Beefy screw x2.stl

___________________________

Updated 7-26-2018
Been playing around with the Octolapse plugin and wanted a higher vantage point for timelapses. I extended the bold and collar to give you a higher view. Rest of the parts are the same.

___________________________


The C270 camera mount is attached to the camera using it's own hinge pin. The dual diameter bolt fits through the sliding mount. To remove the original weighted Logitech mount from the camera, use a thin knife to remove the covers over the ends of the hinge pin. You should then be able to use a screwdriver to remove the pin. You may need to push the pin out with a thin screwdriver or similar tool. The printed camera mount will be loose on the hinge. Use a sma