Cabin 5

Project: Cabin 5.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: PLA+ Sunlu Grey Transmission Distance: PLA+ Sunlu Red Transmission Distance: PLA+ Sunlu Yellow Transmission Distance: PLA+ Sunlu White Transmission Distance:This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.