Cable Grommet + Slide Covers

MAKER WORLD READY! JUST PICK-N-PRINT. Description A standard 1-½ hole cable grommet to clean up a workbench where a standard horizontal cable grommet is not suitable. This grommet can be used as a standalone unit for a minimalist approach to cable management or with one of the multiple available covers that can be printed. My recommendation is the cable grommet with the flush profile cover. The printable covers are slide covers and do not lock into place, except for the flush profile cover that uses the screws for resistance (please see design notes at the bottom of the page). Hardware Needed 1-½" or 38mm Hole Saw Piece Cordless or Corded Drill #6 x ½" Wood Screws Standard Phillips Screwdriver Print Settings You can use any type of printer filament you prefer. All items should be printed in the orientation they show up in your slicer. My settings are listed below: PLA 100% Infill for Primary Grommet (at 15%, it only saves >3 minutes) Layer Height: 0.20mm Perimeters set to 3 Solid Layer