Thingiverse
Cable Organizer - Belt
por Mitabula
16
Descargas
57
Likes
0
Makes
The table frame i recently got myself came with this handy cable manager clips/belts.
You can fit quite a few cables in there and just zip it tight, and also open them easily after.
Sadly i ran out of these so thought they can be reproduced with PLA and TPU.
*How to*
1. Print the belt with TPU Filament.
2. Print the body with PLA or something
3. Pull the belt through the hole
4. Add some double side tape below (18mm width)
v2:
Thicker belt since some belts slipped out when bending really thick cables around corners.
Also added one more hole to lock in.
You can fit quite a few cables in there and just zip it tight, and also open them easily after.
Sadly i ran out of these so thought they can be reproduced with PLA and TPU.
*How to*
1. Print the belt with TPU Filament.
2. Print the body with PLA or something
3. Pull the belt through the hole
4. Add some double side tape below (18mm width)
v2:
Thicker belt since some belts slipped out when bending really thick cables around corners.
Also added one more hole to lock in.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
