Cable Organizer/ Holder Collection

Heyho


Here you have a collection of Holder to tame your Cable jumble :D I got inspired by different Solutions like peaberry´s Cable Tie Base.

I Printed mine with ASA, 0,2 mm layer Height, 0,6 mm Nozzle, 100% infill, 2-3 Perimeter.


Holder Selection:

Single, I, T, + Holder (3 mm Screw)

Width for the cable tie: 4,8 mm



Pyramid + Screw (S = 3 mm, M = 3,5 mm, L = 4 mm)

Width for the cable:

S = 4,15 mm
M =4,84 mm
L = 5,3 mm



Pyramid + Double Sided Tape (Fast & Cheap print, less strength)

Width for the cable:

S = 3,48 mm
M = 4 mm
L = 5,2 mm




I tested all Pyramid (S) and normal Versions to compare its strength.

No wonder: The screwed ones are far stronger. Only the Pyramid (s) got destroyed during the test with a crowbar :) With all other models or if layed through 2 loops of the pyramid, the holder survived the test and instead the cable ties broke.


The holder got only a small visible deformation after the cable ties broke.