MakerWorld
Organizers
Zum Modell
Cable reel SUNLU GEN 3
25
Downloads
11
Likes
12
Makes
Cable reel for SunLu gen 3 spool Only 114 g and 4.5 hours, and you can make use of an extra filament spool! The cable reel is durable and designed so that it does not rotate unless you turn it. In addition, if you wish, you can print a rotating roller that fits perfectly into a Sunlu filament spool. I printed this from PETG. Spinner assemble: 1. Insert the male threaded piece inside the reel, aligning it with the holes 2. Insert the plate piece through the threads 3. Screw the female thread onto the male thread so that the rotating part is around it Reel assemble: 1. Open the old filament spool and place it with the side that has the wider center facing toward the reel2. Screw the lid’s threads onto the reel through the center of the spool. 3. Attach the spool halves to each other
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
