Thingiverse
Cable Track Chain
door Jacaeiro
8
Downloads
5
Likes
0
Makes
Hi,
To anyone interested in printing a chain cable track.
Just print the desired number of links. Each link adds 25mm to the chain. The chain can bend from 0 to 60 degrees. The terminations have slots for four M3 screws. All components have slots to insert Zip ties. Just make sure there's enough play on the cables inside to allow for movement.
All parts were designed to be PETG printed with minimal support (build plate only). It is important to print the parts with the zip ties slots facing down. If other orientations are used they might brake when putting them together.
Best Regards,
José Caeiro
To anyone interested in printing a chain cable track.
Just print the desired number of links. Each link adds 25mm to the chain. The chain can bend from 0 to 60 degrees. The terminations have slots for four M3 screws. All components have slots to insert Zip ties. Just make sure there's enough play on the cables inside to allow for movement.
All parts were designed to be PETG printed with minimal support (build plate only). It is important to print the parts with the zip ties slots facing down. If other orientations are used they might brake when putting them together.
Best Regards,
José Caeiro
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!