Slicer Discord
3DSEARCH / Other Art Models / Cactus Planter Keychain
Cactus Planter Keychain – 3D printable model from MakerWorld MakerWorld
Other Art Models

Cactus Planter Keychain

by egalva00 · Other Art Models
111 Downloads
63 Likes
49 Makes
Go to Model
Cute keychain of a cactus in a pot. A couple red hearts adorn the stems. Small size to not be to obtrusive. Some supports needed. Four color print. Print profile claims 11 hours since there are 2 plates.Plate 1 is one Keychain. Takes about 3.5 hours or so.Plate 2 is 16 Keychains. Takes about 7.75 hours. As you probably know, when doing a multicolor print, it is better to make many to reduce the ratio of model filament to poop filament.
Category
Other Art Models
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate
Why?
supports needed · 2 colors
Single piece Supports required 2 colors / AMS
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Colors
2 (AMS/MMU recommended)
Est. print time
11 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Cactus Planter Keychain?
Any FDM printer should handle Cactus Planter Keychain just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Cactus Planter Keychain need supports when printing?
Yes, Cactus Planter Keychain will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Cactus Planter Keychain?
According to the design notes, Cactus Planter Keychain takes approximately 11 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
Is Cactus Planter Keychain beginner-friendly?
Cactus Planter Keychain is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.
What file format is Cactus Planter Keychain available in?
Cactus Planter Keychain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Cactus Planter Keychain free to download?
Yes, Cactus Planter Keychain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

4 Suggestions
Nuclear power planter
Nuclear power planter
by Wemaketo
↓ 31 ♥ 29
Smiling Cactu
Smiling Cactu
by EricArtisan
↓ 202 ♥ 50
Smiling Cactu
Smiling Cactu
by EricArtisan
↓ 200 ♥ 49
Concrete Dice planter mold
Concrete Dice planter mold
by BLACK-YOKAI
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection