Thingiverse
Caddx peanut - TBS source one V3
von IM15HU
4
Downloads
3
Likes
0
Makes
This is a mount for Caddx Peanut action camera specifically designed for the TBS source one V3 frame. Camera angle is 25 degs .
If you are going to be using the power modules to charge the camera while flying , use a ziptie to secure it in place . There is a small hole directly under the camera mount which needs to opened up by removing the support material. ( Look at the images )
Also use washers when screwing the mount on to the frame.
If you are going to be using the power modules to charge the camera while flying , use a ziptie to secure it in place . There is a small hole directly under the camera mount which needs to opened up by removing the support material. ( Look at the images )
Also use washers when screwing the mount on to the frame.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
