Caddx Vista Standalone Unit

Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV sailing boat.
The Vista is screwed to 4 standoffs and flooded with fresh air from all sides, so its automatic temperature control can be turned off to prevent it from going into low-power mode. The fan is mounted for sucking the warm air out.
The housing measures about 43x38x35mm including screw heads and all together weighs about 56 grams.

In addition to the Vista unit you will need:
- Fan 5V DC 0,56W 30x30x6mm, e.g. https://www.amazon.de/gp/product/B07ZBRGC5K
- 5V regulator for powering fan, MP1584EN 3A 6.5-28Vin, e.g. https://www.ebay.de/itm/284557618805
- 2 screws with nuts M3 for fan
- 4 screws M2 for Vista
- 4 screws M2 for lid
- power cables

FreeCad source included.