Calibration Tile

This is a simple but effective calibration tool to ensure accuracy of your prints. It tests X and Y accuracy and hole diameter accuracy. *** NOTE ***The following instructions modify how your machine functions and could harm your machine. Although it has worked for me, USE AT YOUR OWN RISK! Tools needed:High precision calipers that can measure down to 100ths of a milimeterHow to use:Print out the Calibration Tile using the standard machine settings.Allow the part to cool fully before removing from the build plate.Once it has cooled to room temperature and been removed from the plate, zero your calipers.Measure the Calibration Tile. Be careful and ensure that the Calibration Tile is straight in the calipers.Take 3 measurements of the of both the X and the Y axis and record measurements for each axis. Average the measurements for X and Y separately and record the average.For each axis divide 30mm by the average you recorded for the axis and record that number. You will use these numbers