Camera Desk Mount - Intended For Microscope Use

Clamp, arms and enclosure for a low-cost USB camera module to allow it to be used as a microscope for close-up work, e.g. PCB repairs, watch repairs etc… The camera module has a 38mm x 38mm PCB and can be obtained from AliExpress, and possibly other suppliers. A 16mm focus version was chosen for this application, it works incredibly well. A picture of the 720p camera module is attached in case the link below becomes unavailable. Example 720p camera module available here (as used in the model) : https://www.aliexpress.com/item/1005001630814040.html#nav-specification UPDATE: Example 4K camera module available here (not yet tested in the model but should fit) : https://www.aliexpress.com/item/1005004310905185.html The camera module is a tight push fit in the enclosure, it may be necessary to shave a little off the inner edges of the enclosure or and/or retaining clips to suit your particular camera board, either that or amend the model to suit your board accordingly. The Fusion files for