Camera Mount for Qidi X-Plus 3

A quick camera mount I made up in Fusion 360. This allows for a small webcam to be mounted at the rear of the chamber within the Qidi X-Plus 3.

No Support Required. 10% Infill should be fine. Use at least 3 or 4 perimeters for strength.

Don't use PLA as it may soften if using the chamber heater. Best to use PETG, ASA, or PC.

This is a fan mount for web cameras using the standard 1/4" mounting screw size

This mounting bracket replaces the fan grill on the rear chamber circulation fan

You may need to purchase longer bolts for mounting the fan. 4 x M3x30mm Socket Head Cap Screws will do the job.

So long as your camera is not oversized, the camera should not interfere with the print head.