Candle-Holder with pin

I made this model because you nearly can’t find any candle-holder for dipped candles. Because we have an organized candle dipping, I came up with the Idea to sell it.Designed for a pin with a diameter of 2.5mm and a length of 25mmDesignBecause of, the first version had an issue with sand coming out. I added a small fin to prevent it. For the Lid, I made a version with a 0.2mm PLA layer for better adhesive and less warping. For this, you have to change the first layer to your PLA temp and pause the print to change the Filament. If you can’t get the PLA layer off, you can use a hot air gun or a Filament dryer on 70°C. I would recommend filling the inside with sand for more weight.Main, SpacerFilament: AnyLidFilament: I recommend ABS-FR from Sunlu and PLA for the first layer.Use at your own risk!You are allowed to sell it at local markets, but not on the internet.Assembly:Glue the pin in to the center of the main part.Glue the spacer on top of it.(Optional) fill it with sand.Glue the lid