Candy Claw Machine - Chris's Basement

This is a working candy claw machine that has many 3D printed parts. We shared this at ERRF 2022. Have a look at what it does here:https://youtube.com/shorts/K-8PsoMRIVwNote: Watch the different model files, you don't need to print them all. Some are longer parts that have been split so they are easier to print. Some are 3MF versions of the of the same file that have added supports. Print setting, all parts are printed on PLA other than the files marked with PETG and TPU. PLA parts, all parts are printed with 2 walls and 20% infill, 0.2mm layer height. Except the base, Only difference on those, I use a 0.3, first layer height. The rest 0.2mm. Larger layer height would be fine as well. PETG parts, print them with 4 walls, 30% infill and 0.2mm layer height. TPU, same as PLA. TPU is only used for the feet, can probably be subbed out for PLA or PETG. The whole project is organized over on github. https://github.com/brotherchris/Candy_ClawLink to the BOM on google sheets:https://docs.go