Canelo Álvarez

Project: Canelo Aztec 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 183.75x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.9mm and the Actual Depth is 3mm Swap Instructions: Start with Black At layer #19 (1.6mm) swap to BambuLab Green At layer #22 (1.84mm) swap to Red At layer #27 (2.24mm) swap to White for the rest.