Thingiverse
Canted Side Mount Fore Grip 45 Degrees
di Dystroyr
55
Download
49
Likes
0
Makes
Designed for a more ergonomic use of angled sights. I made this to fit on the side rail of my own piece, but will also work on a lower rail if you mirror the mount file.
The mounting hole for the grip was drawn to fit a #10 UNC - 24 x 1-1/4" Phillips machine screw with a 10mm panhead, but as long as you use a fairly bold machine screw that's at least 1-1/4" long, it should work. Inside the grip is a shallow hex-shaped depression so a nut can easily be dropped into it and fastened without an additional tool. The depression is drawn at an 11mm diameter (in terms of a hex, that is 11mm from one point to the opposite point, NOT from one flat to the opposite flat).
See print settings.
Looks pretty damn cool imo. For airsoft ;)
The mounting hole for the grip was drawn to fit a #10 UNC - 24 x 1-1/4" Phillips machine screw with a 10mm panhead, but as long as you use a fairly bold machine screw that's at least 1-1/4" long, it should work. Inside the grip is a shallow hex-shaped depression so a nut can easily be dropped into it and fastened without an additional tool. The depression is drawn at an 11mm diameter (in terms of a hex, that is 11mm from one point to the opposite point, NOT from one flat to the opposite flat).
See print settings.
Looks pretty damn cool imo. For airsoft ;)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
